Understanding “Burnt Hits”

Every vaper knows the frustration of a burnt hit – that harsh, acrid taste that ruins the enjoyment of your favorite e-liquid. Burnt hits happen when the wick in your vape tank dries out and burns, producing unpleasant flavors and potentially damaging your device. Understanding what causes burnt hits and how to prevent them is crucial for maximizing your vaping experience with your Vista Edge vape.

Causes of Burnt Hits

Burnt hits occur when the cotton wick inside your vape tank absorbs too much e-liquid and then becomes excessively heated, leading to a burning sensation in your throat and an unpleasant, acrid taste. This usually happens when you fire your device without enough e-liquid present to properly saturate the wick.

Several factors contribute to burnt hits. Inconsistent airflow can cause dry hits by not adequately channeling e-liquid to the coil. Vaping at too high a wattage for your coil’s resistance can also overheat the wick, resulting in burning.

Signs of a Burnt Hit

To avoid burnt hits with your Vista Edge vape, it’s important to understand the signs that indicate this issue is occurring.

A harsh, dry, or acrid taste in your mouth is a sure sign of a burnt hit. You might also notice a burning sensation in your throat when inhaling. Additionally, if you see black or brown residue on your coil or cotton wick, it’s another clear indication that the wick has been burned.

Optimizing Your Vista Edge Vape for Optimal Performance

Burnt hits occur when the cotton wick inside your vape tank absorbs too much e-liquid and then becomes excessively heated, leading to a burning sensation in your throat and an unpleasant, acrid taste. This usually happens when you fire your device without enough e-liquid present to properly saturate the wick.

Coil Selection and Replacement

To prevent burnt hits with your Vista Edge vape, consider these preventative measures:

• Prime Your Coil Properly: Before using a new coil or refilling your tank, prime it by dripping a few drops of e-liquid onto the cotton wick. This ensures the wick is thoroughly saturated before you start vaping.
• Avoid Overheating: Use a wattage setting that’s appropriate for your coil’s resistance. Too high a wattage can quickly dry out the wick, leading to burning. Start low and gradually increase wattage until you find the sweet spot.
• Maintain Consistent Airflow: Ensure the airflow control on your Vista Edge is properly adjusted. A good airflow helps draw e-liquid to the coil, preventing dryness.
• Check Your Liquid Level: Regularly monitor your e-liquid level in the tank. Don’t let it run too low, as this can lead to dry hits. It’s best practice to refill your tank when it’s about halfway empty.
• Replace Wicks and Coils Regularly: Over time, wicks and coils degrade and become less efficient. Follow the manufacturer’s recommended replacement schedule for optimal performance and to minimize the risk of burnt hits.

Proper Wattage and Temperature Settings

Burnt hits occur when the cotton wick inside your vape tank absorbs too much e-liquid and then becomes excessively heated, leading to a burning sensation in your throat and an unpleasant, acrid taste. This usually happens when you fire your device without enough e-liquid present to properly saturate the wick.

To prevent burnt hits with your Vista Edge vape, consider these preventative measures:

• Prime Your Coil Properly: Before using a new coil or refilling your tank, prime it by dripping a few drops of e-liquid onto the cotton wick. This ensures the wick is thoroughly saturated before you start vaping.
• Avoid Overheating: Use a wattage setting that’s appropriate for your coil’s resistance. Too high a wattage can quickly dry out the wick, leading to burning. Start low and gradually increase wattage until you find the sweet spot.
• Maintain Consistent Airflow: Ensure the airflow control on your Vista Edge is properly adjusted. A good airflow helps draw e-liquid to the coil, preventing dryness.
• Check Your Liquid Level: Regularly monitor your e-liquid level in the tank. Don’t let it run too low, as this can lead to dry hits. It’s best practice to refill your tank when it’s about halfway empty.
• Replace Wicks and Coils Regularly: Over time, wicks and coils degrade and become less efficient. Follow the manufacturer’s recommended replacement schedule for optimal performance and to minimize the risk of burnt hits.

Prime the Coil Before Use

Prime your coil before each use to ensure proper wick saturation. Drip a few drops of e-liquid onto the cotton wick, allowing it to absorb the liquid thoroughly before you begin vaping. This simple step helps prevent dry hits and burnt flavors.

Vape Usage Techniques to Avoid Burnt Hits

Burnt hits are a common frustration for vapers, resulting in a harsh, unpleasant taste that detracts from your enjoyment. These occur when the wick in your vape tank dries out and burns, often caused by improper use or maintenance. Understanding the causes of burnt hits and implementing preventative measures can significantly improve your vaping experience with your Vista Edge.

Don’t Chain Puff

Chain puffing can lead to burnt hits because it overworks the coil and depletes e-liquid faster than it can be absorbed. Take breaks between puffs to allow the wick to reabsorb e-liquid and prevent overheating.

Always prime your coils before each use by dripping a few drops of e-liquid onto the cotton.

Be mindful of your airflow; proper airflow helps regulate e-liquid flow to the coil, preventing dry hits.

Keep an eye on your e-liquid levels and refill your tank when necessary. A low e-liquid level can increase the risk of burnt hits.

Adjust your wattage setting based on your coil’s resistance. Using a wattage that is too high for your coil can quickly burn the wick.

Replace your coils and wicks regularly as they degrade over time, reducing their efficiency.

Take Smaller, More Frequent Puffs

Take smaller, more frequent puffs instead of long, drawn-out inhales. This allows the wick to reabsorb e-liquid between puffs, preventing it from drying out and burning.

Watch the Time Between Puffs

Watch the time between your puffs. Chain puffing can lead to burnt hits because it overworks the coil and depletes e-liquid faster than it can be absorbed. Take breaks between puffs to allow the wick to reabsorb e-liquid and prevent overheating.

Always prime your coils before each use by dripping a few drops of e-liquid onto the cotton.

Be mindful of your airflow; proper airflow helps regulate e-liquid flow to the coil, preventing dry hits.

Avoid Direct Lung Hits

Burnt hits occur when the cotton wick inside your vape tank absorbs too much e-liquid and then becomes excessively heated, leading to a burning sensation in your throat and an unpleasant, acrid taste. This usually happens when you fire your device without enough e-liquid present to properly saturate the wick.

To prevent burnt hits with your Vista Edge vape, consider these preventative measures:

• Prime Your Coil Properly: Before using a new coil or refilling your tank, prime it by dripping a few drops of e-liquid onto the cotton wick. This ensures the wick is thoroughly saturated before you start vaping.
• Avoid Overheating: Use a wattage setting that’s appropriate for your coil’s resistance. Too high a wattage can quickly dry out the wick, leading to burning. Start low and gradually increase wattage until you find the sweet spot.
• Maintain Consistent Airflow: Ensure the airflow control on your Vista Edge is properly adjusted. A good airflow helps draw e-liquid to the coil, preventing dryness.
• Check Your Liquid Level: Regularly monitor your e-liquid level in the tank. Don’t let it run too low, as this can lead to dry hits. It’s best practice to refill your tank when it’s about halfway empty.
• Replace Wicks and Coils Regularly: Over time, wicks and coils degrade and become less efficient. Follow the manufacturer’s recommended replacement schedule for optimal performance and to minimize the risk of burnt hits.

Avoid chain vaping as this can lead to overheating and dry hits. Take breaks between puffs to allow your vape device to cool down and the wick to reabsorb e-liquid.

Be sure to prime your coils properly each time you use a new coil or refill your tank with e-liquid.

Remember, maintaining good vaping habits will ensure a smooth and enjoyable vaping experience with your Vista Edge vape.

Troubleshooting Burnt Hits

Burnt hits are a common frustration for vapers, characterized by a harsh, unpleasant taste that detracts from the enjoyment of your e-liquid. These occur when the wick in your vape tank dries out and burns, often caused by improper use or maintenance. Understanding the causes of burnt hits and implementing preventative measures can significantly improve your vaping experience with your Vista Edge vape.

Check Your E-Liquid Levels

Check your e-liquid levels regularly. It’s best practice to refill your tank when it’s about halfway empty.

Inspect Your Coils for Damage

Inspect your coils for damage. If the cotton wick is blackened or burned, it’s time for a replacement.

Clean Your Vape Device Regularly

Burnt hits are a common frustration for vapers, characterized by a harsh, unpleasant taste that detracts from the enjoyment of your e-liquid. These occur when the wick in your vape tank dries out and burns, often caused by improper use or maintenance. Understanding the causes of burnt hits and implementing preventative measures can significantly improve your vaping experience with your Vista Edge vape.

• Prime Your Coil Properly: Before using a new coil or refilling your tank, prime it by dripping a few drops of e-liquid onto the cotton wick. This ensures the wick is thoroughly saturated before you start vaping.
• Avoid Overheating: Use a wattage setting that’s appropriate for your coil’s resistance. Too high a wattage can quickly dry out the wick, leading to burning. Start low and gradually increase wattage until you find the sweet spot.
• Maintain Consistent Airflow: Ensure the airflow control on your Vista Edge is properly adjusted. A good airflow helps draw e-liquid to the coil, preventing dryness.
• Check Your Liquid Level: Regularly monitor your e-liquid level in the tank. Don’t let it run too low, as this can lead to dry hits. It’s best practice to refill your tank when it’s about halfway empty.
• Replace Wicks and Coils Regularly: Over time, wicks and coils degrade and become less efficient. Follow the manufacturer’s recommended replacement schedule for optimal performance and to minimize the risk of burnt hits.

Clean your vape device regularly to remove any build-up that could contribute to burnt hits. This includes cleaning the tank, mouthpiece, and airflow control.

Order Vista Edge Series – the best in its class